Skip to main contentSkip to footer
    White silicone roof coating being applied to a Texas commercial flat roof

    Commercial Roof Coatings in Texas & Oklahoma

    Silicone, Acrylic, Polyurethane & SPF Restoration Systems

    Restore your existing commercial roof for 50 to 70 percent less than replacement. Seamless, reflective, and warrantied for 10 to 20 years.

    (877) 487-4826

    Why Choose a Roof Coating Restoration?

    Key Features

    Seamless monolithic membrane, no seams to fail
    ENERGY STAR cool roof reflectivity up to 90 percent
    Extends existing roof life by 10 to 20 years
    Renewable warranties through periodic recoating
    Applied while building stays fully operational
    Compatible with TPO, EPDM, PVC, metal, BUR, SPF

    Business Benefits

    50 to 70 percent cheaper than tear-off replacement
    Typically expense-deductible in year of install (Section 179)
    10 to 25 percent reduction in summer cooling costs
    Zero tear-off debris sent to landfill
    No interior disruption during installation
    Avoids capital expenditure approval cycles

    Types of Commercial Roof Coatings

    TriVAN specifies and installs every major roof coating chemistry across Texas and Oklahoma. The right system depends on your existing substrate, drainage, traffic, and warranty goals.

    Silicone Roof Coatings

    100 percent silicone coatings excel in ponding water conditions and resist UV degradation longer than any other chemistry. Best for flat, low-slope commercial roofs with drainage challenges. Typical 18 to 24 mil DFT in two coats.

    Best for: Ponding water, flat roofs, hot climates

    Acrylic Roof Coatings

    Water-based, highly reflective, and budget-friendly. Excellent UV resistance and Energy Star reflectivity, but should be avoided where ponding water collects. Typical 20 to 30 mil DFT.

    Best for: Sloped roofs, cool roof projects, value installations

    Polyurethane Coatings

    Aromatic base coat plus aliphatic top coat. Superior impact, abrasion, and foot-traffic resistance, ideal for roofs with HVAC service access. Often used to encapsulate SPF (sprayed polyurethane foam) systems.

    Best for: High-traffic roofs, SPF systems, mechanical-heavy buildings

    SPF Spray Polyurethane Foam

    Closed-cell foam sprayed in place adds R-6.5 per inch of insulation and creates a seamless monolithic surface, then is protected with a silicone or acrylic top coat. Improves energy code compliance dramatically.

    Best for: Energy upgrades, irregular substrates, insulation improvement

    Elastomeric & Hybrid Coatings

    Modified silicone-acrylic and butyl hybrids blend the strengths of multiple chemistries. We specify these for targeted situations where pure single-chemistry systems would be suboptimal.

    Best for: Specialty substrates, transitional restorations

    Substrate Compatibility

    Coatings can be specified over nearly every commercial roof substrate. Explore our TPO, EPDM, PVC, and metal roofing pages for substrate detail.

    SubstratePrimerRecommended CoatingNotes
    TPO Single-PlyUniversal acrylic primerSilicone or acrylicCoating extends membrane life by 10 to 15 years
    EPDM RubberEPDM-specific bleed-block primerSilicone preferredPrevents oil migration and seam separation
    PVC Single-PlyPVC-compatible primerSilicone or polyurethaneRestores plasticizer-depleted membranes
    Modified Bitumen / BURAsphalt bleed-block primerSilicone or polyurethaneExcellent fit for older asphaltic roofs
    Metal (Standing Seam, R-Panel)Rust-inhibitive metal primerAcrylic or siliconeEncapsulates rust and seals fasteners
    SPF (Sprayed Foam)Direct-bond, no primer requiredSilicone or acrylicProtects foam from UV and impact
    Concrete Roof DeckPenetrating concrete sealerPolyurethane top coatWaterproofs porous deck systems

    Roof Coating Cost in Texas & Oklahoma

    Typical installed pricing by coating system, compared to a full tear-off. Get a precise number with a free commercial roof inspection or call (877) 487-4826.

    SystemInstalled CostManufacturer Warranty
    Acrylic Restoration System$1.50 to $2.75 / sq ft5 to 10 years
    Silicone Restoration System$2.25 to $4.00 / sq ft10 to 20 years
    Polyurethane Coating System$2.75 to $4.50 / sq ft10 to 15 years
    SPF + Silicone Top Coat$4.50 to $8.00 / sq ft15 to 20 years
    Full Tear-Off & Replacement$8.00 to $15.00 / sq ft20 to 30 years

    What drives roof coating cost

    • Coating chemistry (silicone premium to acrylic, polyurethane in between)
    • Total dry mil thickness and number of coats
    • Substrate condition and required repairs before coating
    • Penetrations, curbs, and accessory count requiring reinforcement
    • Warranty term length (longer warranties require more mils)
    • Roof access and staging requirements

    ROI, Tax Treatment & Energy Savings

    Because a roof coating restores rather than replaces the existing roof, the IRS typically permits it to be expensed under Section 179 in the year of installation rather than capitalized over 39 years like a full replacement. For most building owners, that converts a long depreciation schedule into an immediate deduction.

    Reflective white silicone and acrylic coatings carry ENERGY STAR cool roof labeling, reflecting up to 90 percent of incoming solar radiation. On conditioned commercial buildings in Texas and Oklahoma, this typically reduces summer cooling loads by 10 to 25 percent and lowers rooftop surface temperatures by 50 to 80 degrees Fahrenheit, extending HVAC life and improving tenant comfort.

    Combined with avoided tear-off costs, accelerated tax treatment, and ongoing utility savings, a coating restoration typically pays back in 3 to 6 years on a roof that would otherwise have required replacement.

    Industries Best Served by Roof Coatings

    Coating restoration is ideal for facilities with large roof areas, active operations that cannot tolerate tear-off disruption, and capital plans that need to defer replacement.

    Our Roof Coating Installation Process

    1. 1

      Roof Inspection & Moisture Survey

      Walk-through and infrared moisture scan to confirm decking and insulation are dry and the existing membrane is a candidate for restoration.

    2. 2

      Power Wash & Surface Preparation

      Low-pressure wash to remove dirt, chalk, oxidation, and contaminants. Critical for proper coating adhesion.

    3. 3

      Targeted Repairs

      Reinforce seams, repair tears, address ponding low spots, and re-secure loose flashings before coating.

    4. 4

      Primer Application

      Substrate-specific primer applied where required (EPDM, modified bitumen, rusted metal, etc.) to lock in bond strength.

    5. 5

      Base Coat & Reinforcement

      First coat applied at specified mil thickness, with polyester fabric embedded at seams, penetrations, and stress points.

    6. 6

      Top Coat & Final Inspection

      Second coat applied to reach total system DFT. Wet-mil gauge checks during application and a final QA walk before warranty issuance.

    When a Coating Is NOT the Right Solution

    A coating preserves a sound roof, it does not rescue a failed one. We will recommend a full replacement when:

    • Moisture survey shows widespread saturated insulation
    • Decking is structurally compromised or deflected
    • Membrane seams have widespread separation beyond targeted repair
    • Existing roof is at or past warranty end-of-life with documented active leaks throughout
    • Building modifications require significant new penetrations or roof reconfiguration

    TriVAN's inspection determines coating candidacy honestly. If a coating is not the right solution, we will recommend a replacement system instead, never a band-aid.

    Warranty & Long-Term Maintenance

    Manufacturer Warranty

    • 5 to 10 year acrylic system warranties
    • 10 to 20 year silicone system warranties
    • Renewable through periodic recoating at warranty end

    TriVAN Workmanship

    Roof Coating Service Areas

    TriVAN installs commercial roof coatings across every major metro in Texas and Oklahoma.

    Frequently Asked Questions

    RCAT (Roofing Contractors Association of Texas) member
    RCAT Member
    HAAG Certified Inspector
    HAAG Certified
    Woman Owned Small Business
    WOSB
    Oklahoma Construction Industries Board
    CIB
    TIPS Awarded Vendor
    TIPS Vendor

    Ready to Restore Your Commercial Roof?

    Get a free roof assessment and coating system recommendation. Call (877) 487-4826 or request a quote online.

    View All Roofing Products