
Commercial Metal Roofing in Texas & Oklahoma
Standing Seam, R-Panel & Architectural Metal Systems
Long-lasting commercial metal roofing built for Texas heat, Oklahoma hail, and decades of low-maintenance performance. 40 to 70 year lifespan, Class A fire rating, Class 4 hail resistance.
Why Choose Commercial Metal Roofing?
Key Features
Business Benefits
Types of Commercial Metal Roofing
TriVAN designs and installs every major commercial metal roofing profile across Texas and Oklahoma. The right system depends on slope, span, budget, and aesthetic requirements.
Standing Seam Metal Roofing
Concealed-fastener panels with raised vertical seams. The gold standard for weather tightness and longevity, with no exposed screws to fail over time.
Learn about our standing seam systems →R-Panel and PBR Panels
Through-fastened ribbed steel panels. Cost-effective for warehouses, agricultural buildings, and pre-engineered metal buildings where budget matters more than premium aesthetics.
Screw-Down (Through-Fastened) Systems
Economical option for low-slope commercial roofs. Best suited for buildings with thermal expansion controlled by panel length and proper fastener selection.
Architectural Metal Panels
Flush, reveal, and tapered panels for high-visibility facades, canopies, and feature walls. Designed for visual impact rather than primary weatherproofing.
Structural Metal Roofing
Heavy-gauge panels that span between purlins without requiring continuous decking. Ideal for warehouses, manufacturing, and large-span commercial buildings.
Metal Roofing Cost in Texas & Oklahoma
Typical installed pricing ranges by system. Get a precise number with a free commercial roof inspection.
| System | Installed Cost | Expected Lifespan |
|---|---|---|
| Standing Seam (24ga, Kynar 500) | $11 to $18 / sq ft | 50 to 70 years |
| Standing Seam (24ga, SMP finish) | $9 to $14 / sq ft | 40 to 50 years |
| R-Panel / PBR (26ga) | $6 to $11 / sq ft | 25 to 40 years |
| Screw-Down Corrugated | $5 to $9 / sq ft | 20 to 35 years |
| Aluminum Standing Seam | $14 to $22 / sq ft | 50+ years |
What drives metal roofing cost
- Panel gauge (22ga heavier and more expensive than 24ga or 26ga)
- Finish system: Kynar 500 (PVDF) versus SMP versus polyester
- Existing roof condition and whether tear-off or retrofit is required
- Roof slope, penetrations, curbs, and skylight count
- Building height and access requirements
- Snow guards, gutters, and trim accessories
Metal vs TPO vs PVC vs EPDM
Compare commercial metal roofing against the leading single-ply membrane systems. Explore our TPO systems, PVC roofing, and EPDM roofing pages for full detail on each.
| System | Lifespan | Fire | Wind | Recyclable | Best For |
|---|---|---|---|---|---|
| Metal (Standing Seam) | 50-70 yrs | Class A | 150+ mph | 100% | Long-term ROI, hail zones |
| TPO | 20-30 yrs | Class A | 120-150 mph | Yes | Cool roof on a budget |
| PVC | 25-35 yrs | Class A | 150+ mph | Yes | Chemical exposure, restaurants |
| EPDM | 20-30 yrs | Class A (ballasted) | 120 mph | Yes | Large simple roofs |
Industries Best Served by Metal Roofing
Metal roofing fits long-life commercial buildings where downtime is expensive and lifecycle cost matters more than first cost.
Our Metal Roofing Installation Process
- 1
Inspection & Assessment
Drone and walk-through inspection, deck core sampling, and structural load review.
- 2
System Design & Engineering
Panel profile, gauge, finish, and clip spacing engineered for local wind uplift and snow loads.
- 3
Tear-Off or Retrofit Decision
Recommend full tear-off or metal-over-existing retrofit based on existing roof condition.
- 4
Substrate & Underlayment Prep
Replace damaged decking, install high-temperature underlayment, and verify deck fastener pull-out.
- 5
Panel Installation
Field-formed or factory-formed panels installed with engineered clips, flashings, and curb details.
- 6
Finishing, QA & Punch List
Seam crimping verification, weathertightness inspection, and final manufacturer warranty issuance.
Energy Efficiency & Cool Roof Benefits
Modern PVDF (Kynar 500) finishes on commercial metal roofing reflect 25 to 70 percent of incoming solar radiation depending on color. That reflectivity reduces cooling loads on conditioned buildings by 10 to 25 percent during Texas and Oklahoma summers.
Most TriVAN metal systems qualify for ENERGY STAR cool roof labeling and meet California Title 24 and ASHRAE 90.1 reflectance requirements. Pair a cool metal roof with continuous rigid insulation for a high-performance commercial building envelope.
Metal roofing is also the preferred substrate for rooftop solar PV: panels mount directly to standing seams with non-penetrating clamps, preserving the manufacturer weathertightness warranty.
Warranty & Maintenance
Manufacturer Warranty
- 30 to 40 year paint and finish warranty (Kynar 500 PVDF)
- 25 year substrate (Galvalume) warranty
- 20 to 25 year weathertightness warranty on qualifying standing seam systems
TriVAN Workmanship
- Comprehensive installation workmanship warranty
- Annual preventive maintenance programs available
- Priority emergency repair dispatch across Texas and Oklahoma
Recommended maintenance checklist
- Biannual visual inspection of seams, flashings, and penetrations
- Clear gutters and downspouts of leaves and debris
- Inspect exposed fasteners on R-panel systems every 5 years
- Touch-up paint on scratches before substrate exposure
- Document any hail events for insurance and warranty claims
Metal Roofing Service Areas
TriVAN installs commercial metal roofing across every major metro in Texas and Oklahoma.
Frequently Asked Questions





Ready for Long-Lasting Commercial Metal Roofing?
Get a free consultation and quote on your Texas or Oklahoma commercial metal roofing project. Call (877) 487-4826 or request a quote online.
